EXPRESS 200S

200 Kg (440 Lbs)

The Express 200S is designed to allow glaziers to unload, transport and install large plates of glass.

  • Lifting capacity 200 Kg
  • 2 x 300mm vacuum cups
  • Holds glass up to 3660 x 1500mm
  • Rotates glass 360°
  • Pivots glass 90° to side for doorways
  • Mast extendable by 250mm
  • Wheel base extendable for better stability
  • Side shifter for precise Installation
  • One man operation
  • Portable for on-site glazing
  • Assembles in minutes

Express 200S Auto Option

Quattrolifts offers an upgrade which allows for the attachment of a battery and vacuum pump and controller. This feature, combined with a H frame (lifting arm) and extra vacuum cups allows for the lifting arm (H frame) to be detached from the machine and raised using a crane (below the hook lifter).

Additional Options

  • Vacuum Cups for Curved Glass
  • Lower Vacuum Cup Extensions
  • Forward Vacuum Cup Extensions
  • Counter Weight
  • Window Frame Carrier
  • Battery Powered Vacuum Pump
  • Foam Vacuum Pads for Stone
 
 

Lower Extension

Forward Extension


Counter Weight

Window Frame Carrier

Battery Powered
Vacuum Pump

Foam Vacuum Pads
for Stone

H Frame

Vacuum Cups
for Curved Glass

SPECIFICATIONS

Lifting capacity: 200 Kg
Handles glass up to 3660 x 1500mm
Front castors retract for glazing
Vacuum Cups: 2 x 300mm
Solid rear 300mm wheels
Pivots glass 90° to side for doorways
Mast extends 250mm
360° glass rotation
Wider axle for greater stability
Side Shift for Glazing 80mm
Machine Weight with Vacuum Cups Removed - Top half 32 Kg, Bottom half 30 Kg

TESTIMONIALS

Kym Wilson
Kym WilsonBayview Glazing QLD AUSTRALIA
Read More
Just a quick note to say what a great piece of equipment. As I am a glazier that has a buggered back and now confined to the shiny seat in the office I reckon if the Nomad was around 25 years ago I would still be glazing commercial. We have just done our first two reglazes both 12.38 laminate 2400 x 3400 aprox 1000 off the ground in a local shop front. Last time it took 3hrs and 6 men to reglaze 1 panel only including scaffold and back pain. This time 4 people and the Nomad, no scaffold and 2 panels took 1 hour including loading the old 12.38 lam on the truck!!!!!! Possibly could have used 3 people but being the first time, are to be sure to be sure! Instant success and the knockers are now believers!! We set a frame approx 2 mtrs square up in the factory and used a piece of 8.38 lam for practice and used 6 people to glaze the panel two times each as a training session before tackling possibly the biggest reglazes in town. Thanks for the prompt service and I will recommend this machine and your business anywhere anytime. Regards extremely happy” Kym Wilson